【万象】98%石墨化增碳剂 铸铁专用
石墨增碳剂是指经过石墨化的增碳剂，在高温条件下，碳原子的排列呈石墨的微观形态，所以称之为石墨化。
固定碳 | ≥98.5% | 灰分 | ≤0.5% |
挥发分 | ≤0.5% | 硫 | ≤0.05% |
水分 | ≤0.5% | 氮 | ≤0.03%（300ppm） |
石墨化增碳剂产品使用方法：在电炉底部放置炉料三分之一后将计算好的产品放置在炉料上，（炉中放一部分料后放增碳剂）然后把剩余炉料按要求放在上面，如上面的炉料较大时应把一些较碎的炉料压在增碳剂上，以防止漂浮影响吸收率。增碳剂加入量是金属量的1-3%，用户也可根据产品生产质量要求自行调整。增碳剂的特点是碳在铁液中吸收效果好，不返渣，使用增碳剂可大幅度降低铸件生产成本。
一、产品质量承诺：
1、产品的制造和检测均有生产记录和检测资料。
2、对产品性能的检测，我们诚请用户亲临对产品进行全过程、全性能检查，待产品被确认合格后再包装发货。
二、产品价格承诺：
1、在保证产品质量的条件下，我厂绝对以最优惠的价格向客户提供产品。
2、在不降低产品技术性能的基础上，以同行业的最低价向客户提供服务。
三、产品交货期承诺：
按照用户要求，双方协商一致，按合同条文执行交货程序，若有特殊情况，需变更交提货时间的，我厂可最大努力尽量满足用户要求。
Product introduction:
Graphite carburant refers to after graphite carburant, in under the condition of high temperature and carbon atoms arranged in graphite morphology, so called for graphitization.
Application range:
Graphitized carbon agent product usage: placed at the bottom of the furnace, after one third of the burden will calculate good products placed on the furnace charge, furnace put part of the material after put recarburizer) and the remaining charge according to the requirements in the above, such as the above charge large should put some more crushing burden of pressure on the carburant, to prevent the floating effect absorption rate. Recarburizer addition amount is 1-3% of metal, the user can also adjust itself according to the requirements of the quality of the products. Carburant characteristics is carbon in liquid iron absorption effect is good, does not return slag, recarburizing agent can greatly reduce the cost of castings.
After-sale service:
One, product quality commitment:
1, product manufacturing and testing are production records and inspection data.
2, the detection of product performance, we sincerely ask the user to visit the whole process of the product, the full performance test, the product is confirmed to be qualified and then packaged delivery.
Two, product price commitment:
1, under the condition of ensuring the quality of the product, I plant to the most favorable price to provide customers with the products.
2, on the basis of not reducing product technical performance, with the industry's lowest price to provide customers with services.
Three, product delivery commitments:
According to user requirements, the two sides agreed to the contract, the delivery procedures, if there are special circumstances, the need to change the delivery time, I plant can make the greatest efforts to meet user requirements.
如需大图可直接点击图片显现
宽城万象活性炭厂
厂 址：河北承德宽城满族自治县
联系人：宋琳琳
手 机：
Q Q ：3062670435
邮 箱：3062670435 @qq.com
网 址：https://shop.1688.com